- Open model in Cura, save GCode (see settings above or use the Mac Pro at lab)
- open http://ultimaker.local/ (or http://192.168.110.150/ if your OS does not support mDNS)
- Login as “hacklab” (password is the same)
- Click upload and choose your gcode file
- Locate your geode file in the Files list click on “load and print” (the print-icon), if the icon is grayed out make sure the printer connection is active, if “connect” button as available, click it.
- Go check the big red button, if it’s not lit, press it. If it does not light up things definitely will not work, you will need to start troubleshooting.
- Wait and watch the bed temperature rise, if it does not you have a problem and need to troubleshoot.
- Once the bed is hot, the extruder should heat up too.
- Once both bed and extruder are up to their working temperatures the print will start.
Re ABS, it will also need a hood of some sorts to keep the airt warm inside and the ABS from warping